Music-On-Hold modules from PRAF. Key words: Callina Siemona MPPI module Hicom Hipath BGM MOH Messaging-On-Hold PBX PABX SEM-100 Key Telephone System


[ Follow Ups ] [ Post Followup ] [ The TelephonyWorld Forum ] [ FAQ ]

Posted ByPRAF Microcomputer Technologies Ltd. on December 23, 19102 at 19:19:26:

PRAF Microcomputer Technologies Ltd. is a company that specializes
in development and manufacturing of the smart microcomputer based
systems in the telecom, industrial and military fields.

Please be introduced of our Music-On-Hold modules.

***
Callina MT60/MT60H Music-On-Hold modules for any PBX equipped with
Music-On-Hold input terminal. Also the modules can be connected via
a CO trunk.
With these low cost, miniature modules 60 seconds of audio clip can
be easy recorded and played back in loop on the lines kept "on-hold".

- 60 seconds of recording and playing it back in loop
- easy recording procedure with auto-stop
- occasional erasing protection
- Automatic Gain Control to compensate for the wide range of input levels
- recorded and output signals monitoring with built-in speaker
- output signal level operative control
- easy installation inside of any PBX telephone systems
- no additional power supply is required if a reserve battery of PBX
is used with the wide range power supply voltage version (MT60H),
so that the Music-On-Hold service will be protected of power net
interrupts as well.
- digital solutions with no moving mechanical parts, non-volatile
memory allows 100,000 record cycles and 100-years message
retention (typical)
- Miniature size and low cost

***
Siemona S32E/S32H/S65E/S65H MPPI modules can be used with Siemens
telephone systems like Hicom 100E, Hicom150E Office Com, Point,
Hicom 150H Office Com, Hicom 150E Office One, Hicom 150H Office One,
HiPath 3xxx series, and Telekom Octopus E10/E20/E30 telephone systems
of Deutsche Telekom.

- 32/65 seconds of total capacity
- easy installation on the existing MPPI module connector inside of
the telephone system
- no additional power supply or battery required
- fully digital solution with no moving mechanical parts
- miniature size and low cost

***
SEM-100 Hicom Hipath MPPI Port Emulator to playback musical clips
stored in the MPPI modules without the telephone systems.
The emulator is intended for testing purposes while recording
Siemona S32E/S65E/S32H/S65H MPPI modules of the Hicom and Hipath
telephone systems.

- built-in speaker with volume control
- analogue line out for signal monitoring with active speaker
- includes detailed MPPI modules recording instructions

Dear dealers and distributors!
We trust our products will have interest on your telephony market,
reflecting needs and quality requirements of your customers.
Please contact us with your comments, questions and suggestions.
We express our hopes for future co-operation with you in success.

Sincerely,
PRAF Microcomputer Technologies Staff.
58171 Holon, P.O.Box. 7209, Israel
E-mail: prafinfo@inventnet.com



Follow Ups



Post Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ The TelephonyWorld Forum ] [ FAQ ]